黑族論壇

黑族論壇

分享讓知識傳播,閱讀讓心靈成長, 創作讓文化傳承,讓我們共同努力。
  • 禁止廣告文
  • 知識傳播
  • 閱讀
  • 心靈成長
  • 創作
  • 文化傳承
發表新主題
隨機主題
上個主題
下個主題
|
純手工木造汽車

Hand-Made Wooden Car

The “Tryane II” is a one-of-a-kind, hand-made wooden car, put together with a process similar to that used by boat builders, described by its creator Friend Wood (no joke) as “dozens of narrow strips of mahogany veneer, glued with epoxy resin, laid in 3 layers over a male mould.”

I measured the 2CV components before making some 1/5th scale drawings of the proposed car. I then carved a similar scale body model to check the drawings. Once satisfied I drew out the lines full size on two sheets of hardboard. From these lines I constructed a male mould made from chipboard formers and softwood laths to the shape of the body shell. On to this mould I stapled and glued three layers of l.5mm mahogany veneers, This process took over 600 hours and 20,000 staples, all of which were pulled out when the glue was dry.

The whole thing only weighs 900 pounds, making it capable of 70 to 90 miles per gallon.

原作網址

  • 關鍵字 : mould, similar, scale, process, making, mahogany, lines, layers, glued, drawings, 原作網址, wooden, whole, which, weighs, veneers, veneer, together, three, thing
0 0
2009-02-24T08:08:39+0000


  • 當您未登入黑族時,可以利用臉書 Facebook 登入來發表迴響。若使用黑族會員身份發表迴響則可獲得經驗值及虛擬金幣,用來參加黑族推出的活動。
發表迴響
驗證字串
留言